jiasheng_yang_bild

M.Sc. Jiasheng Yang

  • Institut für Strömungsmechanik
    Karlsruher Institut für Technologie
    Kaiserstraße 10, Geb. 10.23
    76131 Karlsruhe
    Tel.: +49 721 608 42368
    Fax: +49 721 608 45147

Journal Publications


2024
Flow resistance over heterogeneous roughness made of spanwise-alternating sandpaper strips
Frohnapfel, B.; Deyn, L. von; Yang, J.; Neuhauser, J.; Stroh, A.; Örlü, R.; Gatti, D.
2024. Journal of Fluid Mechanics, 980, 1–35. doi:10.1017/jfm.2024.40
2023
Prediction of equivalent sand-grain size and identification of drag-relevant scales of roughness – a data-driven approach
Yang, J.; Stroh, A.; Lee, S.; Bagheri, S.; Frohnapfel, B.; Forooghi, P.
2023. Journal of Fluid Mechanics, 975. doi:10.1017/jfm.2023.881
A comparison of hydrodynamic and thermal properties of artificially generated against realistic rough surfaces
Yang, J.; Velandia, J.; Bansmer, S.; Stroh, A.; Forooghi, P.
2023. International Journal of Heat and Fluid Flow, 99, Art.-Nr.: 109093. doi:10.1016/j.ijheatfluidflow.2022.109093
2022
Shear response behavior of STF/kevlar composite fabric in picture frame test
Ma, Y.; Hong, X.; Lei, Z.; Bai, R.; Liu, Y.; Yang, J.
2022. Polymer Testing, 113, Art.-Nr.: 107652. doi:10.1016/j.polymertesting.2022.107652
Direct numerical simulation-based characterization of pseudo-random roughness in minimal channels
Yang, J.; Stroh, A.; Chung, D.; Forooghi, P.
2022. Journal of Fluid Mechanics, 941, Art.-Nr.: A47. doi:10.1017/jfm.2022.331
Predicting drag on rough surfaces by transfer learning of empirical correlations
Lee, S.; Yang, J.; Forooghi, P.; Stroh, A.; Bagheri, S.
2022. Journal of fluid mechanics, 933, A18. doi:10.1017/jfm.2021.1041
Simulation of Flow over Pseudo-Random Rough Surfaces
Yang, J.; Stroh, A.; Forooghi, P.
2022. High Performance Computing in Science and Engineering ’20 – Transactions of the High Performance Computing Center, Stuttgart (HLRS) 2020. Ed.: W. Nagel, 387–400, Springer International Publishing. doi:10.1007/978-3-030-80602-6_25

Conference Contributions


2023
Assessing different roughness description methods in skin friction prediction
Yang, J.; Stroh, A.; Lee, S.; Bagheri, S.; Frohnapfel, B.; Forooghi, P.
2023, September. 14th International ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements (ETMM 2023), Barcelona, Spain, September 6–8, 2023
DNS-based thermohydraulic assessment of artificial roughness surrogates
Yang, J.; Velandia, J.; Bansmer, S.; Stroh, A.; Forooghi, P.
2023, August 14. 17th International Heat Transfer Conference (IHTC 2023), Cape Town, South Africa, August 14–18, 2023
2022
An active learning approach for the prediction of hydrodynamic roughness properties
Yang, J.; Stroh, A.; Friederich, P.; Frohnapfel, B.; Forooghi, P.
2022. 12th International Symposium on Turbulence and Shear Flow Phenomena, TSFP 2022, Osaka, Japan, 19 - 22 Juli 2022
2021
Study of irregular roughness in minimal channels
Yang, J.; Stroh, A.; Jakirlic, S.; Frohnapfel, B.; Forooghi, P.
2021. ETMM 13, International symposium on engineering, turbulence, modelling and measurement, 15.09.-17.09.2021
Comparison of Different Solvers and Geometry Representation Strategies for Dns of Rough Wall Channel Flow
Theobald, F.; Schäfer, K.; Yang, J.; Frohnapfel, B.; Stripf, M.; Forooghi, P.; Stroh, A.
2021. 14th WCCM & ECCOMAS Congress 2020 : virtual congress, 11-15 January, 2021 / IACM, ECCOMAS. Ed.: F. Chinesta, International Centre for Numerical Methods in Engineering (CIMNE). doi:10.23967/wccm-eccomas.2020.089